Showing posts with label do it yourself. Show all posts
Showing posts with label do it yourself. Show all posts

Tuesday, April 5, 2011

Step by Step- DIY your own baby wrap!- Washing, and cutting, and sewing

Part two of my step by step diy wrap instruction
part one can be found here

After you have found your perfect fabric the first thing you need to do with it is wash the fabric.  This is very important because the fabric may shrink a little and if you wait till you are finished sewing it to wash, you are going to have a mess.  Your fabric should come with washing instructions, if it does not, ask one of the people working in the fabric shop the best way to care for your material. 
My advice for you is, if its going to be a challenge to wash it every time, you may want to consider another fabric.  Babies spit up, poop, pee, etc.  Wraps can get dirty, so washing usually happens time to time.  For the most part, natural fabrics are easiest to care for, so usually dont cause problems.


Dry your fabric in the dryer, this will help make sure it has done its strinking.

When you are done washing your fabric, you need to cut it to the width you want.  I sudgest making it between 27-32 inches wide. Rember you are going to be hemming it so I would make it about 1.5, two inches wider than you really want it.  Depending on the width of the material when you buy it, you may be able to get two wraps out of it! 


Now you will need to hem your wraps edges.  Some people like to iron their seams first making it a bit easier at the sewing machine... I am too lazy and I dont do it.  As far as thread goes, get the colour you want- most people like to get a colour that is the same colour as their fabric.  If you are dying your wrap (I will have instructions soon on how to dye a wrap soon), then you can buy a white cotton thread and it will dye up nice.  I always use Gutermann's 100 percent cotton threads.       They are very strong good quality threads.

At the sewing machine I fold the edge twice this way you are not seeing the raw edge

fold once                                   fold again

My sewing machine has markers on it so I can make sure that the seam is the same width the whole way down which is why I dont iron it first.  I sew a bit then I fold the next stretch, sew, fold, etc. 
Sew down the side of your seam near where you folded, that way it is closed. It does not really matter how long your stitches are, but a smaller stitch in my opinion always looks nicer.  It takes a bit longer, but in the end, I think its worth it.

Do this down the two long sides of your wrap and the two ends of your wrap and TADA you are finished and have a cheap affordable comfortable baby carrier! 


next in the series ~~ Dying your wrap

Saturday, April 2, 2011

Step by Step- DIY your own baby wrap!- FABRICS

This is an extention of my webpage www.barefootbuttercup.com which is currently not up. sorry for any inconvience

I have been notified that getting this information on the barefoot buttercup blog would be a good idea.  So here it goes.  Over the next few weeks I will be posting all my DIY ideas and obsessions for my followers and peekers to see (I see you Carly, I know you are there)

Did you know that your local fabric store, thrift store or even department store could very well have the wrap of your dreams inside? The only problem is, its not quite a wrap yet! But it isnt hard to do!

The great thing about making your own wrap is that no one will ever have the exact same wrap as you. It would be your unique carrier for you and your child. It is something you can look at and say "hey, I made that!" And I think that is a terrific feeling! 
What should you look for in a material for making a woven wrap?
I sudgest using a cotton, or something made with natural fibers. They breathe better. You want it to be a relaxed fabric too, something flexible and not stiff, you dont want to wrap a baby in canvas or leather!! Think, "would I liked to be wrapped in this?"
Another thing to conisder is, does "the sun shine through?" When holding the material up to the light, can you see the light peeking through the weave? If so, thats good! you dont want a very tight weave (like in quilters cottons for example) ..that doesnt help it be comfortable.  You will most likley end up with pressure points. If the sun is shining through this means more comfort and breathablity... think table cloth like... and btw, woven table cloths make excellent shorter wraps!  For a woven wrap, you dont want a ton of horizontal or vertical stretch like jersey would have.  You want it to be able to be used with your child through the time you are wearing you child, and that means even when they are toddlers, maybe even preschool age.  Stretchy material is fantastic for wearing little ones who dont weigh a ton, but will sag with a bigger child and are not reccomended for back carries.  (click link to see why)
Here are some examples of what I have found in hopes to better help you find the right thing.  First lets take a peek in the fashion section of your local fabric store
 -dont go for fabrics such as quilters cottons, shiny polyesters, or satin. Although yes you CAN wrap a baby in them (because face it, you can wrap a baby in almost anything!) , it isnt as comfy as openly woven, natural materials that also go on sale quite a bit, so in the long run is better and cheaper! :D

Lets have a look at cotton gauze. Gauze usually sell for about 7$ a meter CDN, so 7 x 5 meters =35$
and sales happen frequently, so it can get even cheaper than this! 
100% gauze or crinkle cotton is an easy and practical choice. Crinkle cotton is slightly heavier than 100% cotton gauze. It is very breathable for summer, dyes easy . I reccomend buying at least five meters of the gauze or crinkle cotton. If there is too much, you can always shorten it. Better to buy too much than too little. with a wrap that is going to be thin like this, I reccomend cutting it to be around 32 inches wide, that way you have more shoulder padding.  Gauze, I find you have to wrap more careful when your children get bigger.  By this I mean you have to wrap them slower so its as tight as possible..no sloppy wrap jobs with a gauze wrap because then it can be not as comfortable.  But get a good nice carry with it and you're good to go.



Sometimes when browsing the fabric store you will come across amazing woven materials that are cotton or cotton blends or a blend of another natural fiber. The one in the picture shown below is a 55% linen, 45% cotton blend. It is a tiny bit thicker than gauze, and is breatheable, moveable, and has no stretch to it. This type of fabric will make an excellent wrap. Needs a bit more breaking in due to the linen, but works wonderfully. I would reccomend a material like this be hemmed between 27-32 inches wide and again, 5 meters long. osnaberg, woven hemp/cotton blends will work amazing as well, but like linen, they need to be broken in a bit more.  I dyed this wrap with Dylon Cold Water Dyes, which are safe for dying and are widley available in Canada at Fabric Land stores as well as other stores such as Walmart and craft and fabric distributors. 


Lets journey to the upholstry section!
****a few things to consider when looking here...

Some upholstry fabrics are treated with things like a stain gaurd, or are permanant press. They can be made of synthetic fibres just like you would find in other departments. Make sure you read your fabric label carefully. You do not want to purchase something that is treated with chemicals.. remember, you are wrapping precious cargo in your wrap. If you are unsure ask an employee of the fabric store. They will be able to assist you.

The upholstry section can be a gold mine!!! You can buy some amazing jaquard fabrics, that have no wrong side, are 100% natural fibres and are absolutly beautiful. Some can be very heavy, like in this example of a upholstry material I purchased.  As thick as this is, it is a very very comfortable wrap, in all honestly, the most comfortable wrap I own.  Even though it technically has a "wrong side".. which would be the lighter side, it is still quite beautiful on each side. So it can be worn either way.  It is not 100% cotton, however, it was an "unknown fibre"... but for the price I got it for, which was about 4$ CDN a meter, I grabbed it anyways... I did a burn test when I got home, discovered it is most likley a cotton/rayon blend. 

The pictures below show just how much thicker this wrap is from a gauze wrap.  Next to that is a photo that shows how the light shines through the weave.

This material that I have dyed using Dylon cold water dyes was also found in the upholstry section on clearance. It is 100% cotton, but called "linen look". It has made a very nice wrap. 32 inches wide, 4.5 meters long.


Get down and really look and take your time especially in the upholstry section.  Usually the bolts are stored in such chaos in some stores that a hidden treasure could be burried.  My blue woven wrap material was like that.  Hidden at the very bottom of the shelf, almost collecting dust. 


Next post will be about sewing your wrap.  Stay tuned and Happy Babywearing! 

Saturday, August 21, 2010

The new webpage is up!!!


I have completed about 98% of the new webpage over the past little while, its still missing a few things I would rather photos with, and a few links , but other than that it is up and I am very happy with the page so far.


I am hoping that this will help guide people interested in creating their own wrap carriers, providing them with good information. I know there are other sites out there that do the same, but I think knowledge is power, and the more people sharing that knowledge the better!

Also, I am still going to provide a page that will direct visitors to purchase a carrier from other WAHM's. If you are a WAHM who makes baby carriers and you would like to link off my webpage (doesnt have to be just wraps, it can be anything), lemmie know and I will be happy to add you.


Happy Babywearing!!!